15 ft. Steel Square Camera Pole | CP15SS0411

The CP15SS0411 is a 15 ft steel square camera pole with a 4-bolt anchor base, designed for security, surveillance, and CCTV applications where a clean look and dependable wind-load performance are required.

The pole shaft is manufactured from weldable-grade, cold-rolled, commercial quality carbon steel tubing conforming to
ASTM A500 Grade B.
All welds conform to AWS D1.1 using ER70S-6 electrodes.
A reinforced handhole with grounding provision supports clean, serviceable field wiring.

Minimum Order
1 unit

Specifications
Gauge: 11 ga
Butt square: 4 in
Top square: 4 in
Height: 15 ft
Finish: Powder coated, galvanized, or powder coated over galvanized (per customer specification)
Handhole: Reinforced 3" x 5" handhole with cover, stainless steel screw and backbar
Grounding: Tapped 1/2"-13NC grounding provision

Base & Anchorage
Base style: 4-bolt steel base plate (fabricated hot rolled carbon steel per ASTM A36 or equivalent, 36 ksi min yield) with 2-piece base cover
Bolt circle: 8–9 in
Base square: 8 in
Bolt projection: 3.75 in
Anchor bolts: (4) L-shaped steel anchor bolts per AASHTO M314-90 Grade 55, with 10" galvanized threaded end per ASTM A153
Hardware: (8) hex nuts, (4) lock washers, (8) flat washers (galvanized steel)
Template: Paper bolt circle template provided

Maximum Equipment Weight: 245 lb

EPA (Effective Projected Area) – sq ft
90 mph: 15.5
100 mph: 11.9
110 mph: 10.9
120 mph: 8.6
130 mph: 6.8
140 mph: 5.4

EPA Notes: Effective Projected Area (EPA) values are calculated using wind velocity (mph) indicated in accordance with
2009 AASHTO LTS-5 using a 25-year design life. Maximum EPA is based on the luminaire/equipment weight shown.
Increased equipment weight may reduce maximum EPA. If weight is exceeded, or if another design life or code is required, consult the factory.

Warning: Do not install pole without equipment.